unisonic technologies co., ltd U74LVC06A cmos ic www.unisonic.com.tw 1 of 5 copyright ? 2011 unisonic technologies co., ltd qw-r502-438.b hex inverter buffers/drivers with open-drain outputs ? description the U74LVC06A contain six independent inverter buffers/drivers with open drain outputs, and performs the boolean function y= a in positive logic. this device has power-down protective circuit preventing destruction of the device when it is powered down. ? features * operate from 1.65v to 3.6v * inputs and open-drain outputs accept voltages to 5.5v * i off supports partial-power-down mode * low power dissipation ? ordering information ordering number package packing lead free halogen free U74LVC06Al-p14-r U74LVC06Ag-p14-r tssop-14 tape reel U74LVC06Al-p14-t U74LVC06Ag-p14-t tssop-14 tube
U74LVC06A cmos ic unisonic technologies co., ltd 2 of 5 www.unisonic.com.tw qw-r502-438.b ? pin configuration ? function table (each inverter) input ( a ) output ( y ) h l l h note: h: high voltage level; l: low voltage level. ? logic diagram (each inverter) logic symbol
U74LVC06A cmos ic unisonic technologies co., ltd 3 of 5 www.unisonic.com.tw qw-r502-438.b ? absolute maximum rating parameter symbol ratings unit supply voltage v cc -0.5 ~ +6.5 v input voltage v in -0.5 ~ +6.5 v output voltage v out -0.5 ~ +6.5 v v cc or gnd current i cc 100 ma continuous output current ( v out =0 to v cc) i out 50 ma input clamp current (v in <0) i ik -50 ma output clamp current (v out <0) i ok -50 ma storage temperature t stg -65 ~ +150 c note: absolute maximum ratings are those values beyo nd which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal data parameter symbol ratings unit junction to ambient ja 113 c /w ? recommended operating conditions parameter symbol test conditions min typ max unit supply voltage v cc operating 1.65 3.6 v data retention only 1.5 v input voltage v in 0 5.5 v output voltage v out 0 5.5 v operating temperature t a -40 85 c low-level output current i ol v cc =1.65v 4 ma v cc =2.3v 8 ma v cc =2.7v 12 ma v cc =3v 24 ma ? electrical characteristics ( t a =25 c , unless otherwise specified) parameter symbol test conditions min typ max unit high-level input voltage v ih v cc =1.65v ~ 1.95v 0.65*v cc v v cc =2.3v ~ 2.7v 1.7 v v cc =2.7v ~ 3.6v 2 v low-level input voltage v il v cc =1.65v ~ 1.95v 0.35*v cc v v cc =2.3v ~ 2.7v 0.7 v v cc =2.7v ~ 3.6v 0.8 v low-level output voltage v ol i ol =100 a v cc =1.65 ~ 3.6v 0.2 v i ol = 4ma v cc =1.65v 0.45 v i ol = 8ma v cc =2.3v 0.7 v i ol =12ma v cc =2.7v 0.4 v i ol =24ma v cc =3.0v 0.55 v input leakage current i i ( leak ) v in =5.5v or gnd, v cc =3.6v 5 a power off leakage current i off v in or v out =5.5v, v cc =0v 10 a quiescent supply current i q v in = v cc or gnd, i out =0, v cc =3.6v 10 a additional quiescent supply current per input pin i q v cc =2.7~3.6v,one input at v cc -0.6v, i out =0, other inputs at v cc or gnd 500 a input capacitance c in v in = v cc or gnd, v cc =3.3v 5 pf
U74LVC06A cmos ic unisonic technologies co., ltd 4 of 5 www.unisonic.com.tw qw-r502-438.b ? switching characteristics (t a =25 ) parameter symbol test conditions min typ max unit propagation delay from input (na) to output(ny) t plz / t pzl v cc =1.80.15v, r l =1k ? c l =30pf 1.4 3.9 ns v cc =2.50.2v, r l =500 ? 1.0 3.1 ns v cc =2.7v, r l =500 ? c l =50pf 1.0 3.9 ns v cc =3.30.3v, r l =500 ? 1.0 3.7 ns ? operating characteristics (t a =25 ) parameter symbol test conditions min typ max unit power dissipation capacitance per inverter c pd v cc =1.80.15v f=10mh z 2.1 pf v cc =2.50.2v 2.3 pf v cc =3.30.3v 2.5 pf
U74LVC06A cmos ic unisonic technologies co., ltd 5 of 5 www.unisonic.com.tw qw-r502-438.b ? test circuit and waveforms v cc inputs v m v load v c l r l v in t r , t f 1.8v0.15v v cc 2ns v cc /2 2 x v cc 0.15v 30pf 1k ? 2.5v0.2v v cc 2ns v cc /2 2 x v cc 0.15v 30pf 500 ? 2.7v 2.7v 2.5ns 1.5v 6v 0.3v 50pf 500 ? 3.3v0.3v 2.7v 2.5ns 1.5v 6v 0.3v 50pf 500 ? note: c l includes probe and jig capacitance. all input pulses are supplied by generators having the following characteristics: prr 10mhz, zo = 50 ? . utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
